SEFIRE · Fireplace guides

Do Electric Fireplaces Use a Lot of Electricity?

Calculate electricity cost from the actual input power, operating mode, hours and tariff. A visual effect and a resistance heater can have very different loads.

Illustrated fireplace setting; an application concept, not an installation drawing

The heater usually changes the calculation

An electric fireplace may offer a flame effect alone, a heater, or both. Read the exact model's ratings and available modes. Do not apply a generic 1,500 W heater figure or a quoted flame-only wattage to every product. Water vapor units are also electrically powered, but their catalog power is not a declared room-heating output.

A transparent calculation

Energy in kWh = input power in watts ÷ 1,000 × operating hours. Multiply that energy by your applicable electricity price per kWh. Include any additional modules or pumps if they are not included in the stated input.

Illustrative loadFour hours of operationCost at an assumed $0.20/kWh
100 W0.4 kWh$0.08
500 W2.0 kWh$0.40
1,500 W6.0 kWh$1.20

These are arithmetic examples, not current tariffs, SEFIRE model ratings or promised running costs. Use your bill and delivered product information for a quotation.

Rated input and actual use

A heater may cycle under thermostat control, so multiplying maximum input by every hour can overstate use in some conditions. Conversely, a cold room can keep it running longer. Use an appropriate meter or energy record where supported, and have hardwired equipment assessed by a qualified person. Do not introduce an unsuitable adapter or measuring device into a high-load supply.

Does zone heating save money?

It can only be assessed against what would otherwise run, occupancy, building heat loss and the heating system. An electric fireplace does not automatically reduce the whole-home bill. A visual effect without heat may simply be an additional decorative load.

What to request from a supplier

Related guides

Project inquiry

Fireplace guides