SEFIRE · Fireplace guides
Can You Put Ceramic Logs on a Bioethanol Fire?
Use decorative logs only where the exact ethanol appliance permits them. Learn why material rating alone does not establish compatibility or safe placement.

Only an approved accessory arrangement
Some ethanol fireplaces allow decorative ceramic logs, while others require the flame opening and surrounding deck to remain completely clear. Use only accessories approved for the exact appliance, in the arrangement shown in its instructions. A log sold as heat resistant or suitable for fireplaces is not automatically suitable for your burner.
Why the layout matters
A decoration can redirect a flame, obstruct air, retain heat or interfere with ignition, sensors and fuel access. It can also prevent an extinguishing cover or closing mechanism from operating. The correct question is therefore not merely whether ceramic survives heat, but whether the complete appliance is designed to operate with that object in that position.
Do not lay logs over a burner slot, drop pebbles into an opening or improvise a support that bridges a flame unless the appliance's approved arrangement specifically requires it. Instructions for a wood stove or gas log set do not establish compatibility with ethanol.
What to confirm before buying
- Appliance manufacturer, model and instruction revision.
- Approved decoration part numbers and quantity.
- A placement diagram showing the burner and all operating controls.
- Required separation from the flame opening and surrounding enclosure.
- Whether decorations must be removed before inspection or servicing.
Manual and automatic burners need separate checks
A manual burner may need clear access for its extinguishing tool. An automatic burner may have ignition electrodes, temperature sensors, fuel connections or a service cover near the visible flame. Do not assume that an accessory permitted on one can be used on the other. For SEFIRE equipment, send the model and an image of the proposed layout for confirmation before ordering decorative media.
When a log effect is the main design goal
If the project requires a dense log bed with flame appearing through it, consider an appliance engineered around that visual effect. Some electric or water vapor systems use dedicated log media, but the mist outlet, heater outlet and maintenance paths still have to remain as specified. Do not use a change of technology as permission to block those openings.
If logs have already been added
Stop using the appliance until the arrangement has been checked against its instructions. Allow complete cooling before handling decorations. Damage, soot, unusual flame behavior or repeated shutdowns need investigation, rather than further experiments with log placement.